Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Beaverton
A gate that won’t close leaves your driveway open to the street. We handle gate repair in Beaverton for homeowners, landlords and property managers who need the gate they already own fixed, not sold a replacement. Our technicians work on wood, wrought iron, steel and aluminum gates plus the operators that drive them, and we schedule across Beaverton neighborhoods and out toward Bethany and Cedar Mill. Tight side yards and shared driveways are routine for us here. Call (855) 473-7281. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Beaverton Homeowners Call Gate Repair Portland for Gate Repair
Gates are all we do. That matters in Beaverton, where a dragging gate is usually a post problem dressed up as a hardware problem, and a generalist crew will happily swap hinges without ever checking the footing. Our technicians have up to 13 years of experience and work on the gate you have, whatever brand drives it.
Beaverton customers call us because we diagnose before we quote. We test the operator, the safety photocell and the loop detector, then check the posts and footings before anyone touches a wrench. If the panel is sound and the post is the culprit, we say so, and the written estimate follows before any work starts.
We keep a strong local reputation by being straight about what failed and what it takes to fix it. Bringing real answers about the conditions that drive gate failure across the Tualatin Valley is the job, every call.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Sliding Gate Repair in Beaverton
Sliding Gate Repair in Beaverton usually starts with the track and the footing, not the motor. Sliding gates suit the tight lots here because the panel travels along the fence line instead of swinging out, which keeps shared driveways and side yards clear. When the ground shifts, the gate leaves the track, stalls mid-travel, or drags hard enough to trip the operator’s overload. Fixing it means resetting the footing, correcting the track, and adjusting the rollers and stops. The written estimate sets the price before work starts, and you get it free.
Track and Roller Corrections
A slide gate that jumps or grinds is telling you the track has bowed or the rollers are flat. We level the track, replace worn rollers, and set the gate so it glides without binding. On a slope, the track grade matters as much as the hardware.
Operator Stall and Travel Limits
An operator that runs but won’t complete its cycle often has limit switches out of adjustment or a photocell in the wrong place. We set the travel limits, check the safety devices, and make sure the gate reverses when something blocks it. That’s an access-control problem as much as a mechanical one.
Wrought Iron Gate Repair in Beaverton
Wrought Iron Gate Repair in Beaverton tends to be about alignment and hardware rather than the iron itself. Metal panels don’t rot, but the hinges sag, the latch strikes drift, and a heaving post throws the whole leaf out of true. We realign the gate, re-hang hinges, repair locks and weld cracked joints, and treat rust where it has taken hold. Most iron gate repairs in Beaverton run $225 to $550, with realignment and hinge work toward the lower end and weld repair or post replacement pushing toward the top. The written estimate fixes the price before work starts.
Hinge and Latch Realignment
When a wrought iron gate sags, the hinge plates and the post tell the story. We adjust the hinge side, re-set the latch strike so the gate closes clean, and check the post below grade. If the footing has shifted, alignment alone won’t hold.
Weld and Rust Treatment
Cracked welds and rusted joints show up on older Beaverton iron gates, especially where water sits. We weld the joint back solid, grind it clean, and treat the rusted area so it stops spreading. Left alone, a rusted hinge point will fail under the gate’s own weight.
Trusted Brands We Service in Beaverton
We’re experienced with the operators people actually own here. Beaverton driveways run LiftMaster and FAAC units, and we also work on Linear, Viking, Ghost Controls, DoorKing, BFT, Elite and Mighty Mule systems. That range is the point: a single-brand dealer will tell you the fix is a new operator when the control board or the safety edge just needs attention. We don’t stock parts, so we diagnose on-site, order what the repair needs, and get your gate back online. Brand-agnostic diagnostics mean the recommendation follows the actual failure, not what’s easiest to sell. For more on how we work, see our gate repair services.
Common Gate Repair Problems We See in Beaverton Homes
- Hinge posts heaved out of clay soil. The Tualatin Valley clay swells through repeated freeze-thaw, and on 15 to 25 year old cedar fences the hinge post lifts and rots, sagging the panel until it drags. A repair that skips the footing re-fails the next wet season.
- Slide gates thrown off the track. A shifted or frost-heaved footing will knock a slide gate off its track or stall the operator mid-travel. Resetting the footing and track fixes what hardware alone won’t.
- Rotted pickets and corroded hinges. Months of rain soak wood and rust the hardware until the gate won’t latch. Catching rot early saves the panel; waiting pulls the whole frame down.
- Tight side-yard clearances. Mid-century lots near downtown often swing a gate into a narrow gap between house and property line where a standard 4-by-8 prefab won’t clear. That calls for a custom-tight swing gate or a slide gate conversion.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Beaverton, OR
Most gate repairs in Beaverton land somewhere between $175 and $650 depending on what failed. Hinge and latch adjustment runs $175 to $325. Post footing repair or post replacement, the real driver on older cedar fences, runs $300 to $650 and is often what makes a dragging gate stay fixed. Slide gate track and roller repair sits in the middle, and operator work such as a control board or safety edge falls near the top. Wrought iron weld repair adds to those ranges when it’s also needed.
What moves the number is access, post condition and whether the operator needs parts. The estimate is free, and the price is quoted and agreed before any work starts. Call (855) 473-7281 for an exact Beaverton estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
We Also Serve Cities Near Beaverton
If you’re just outside the city line, we cover the surrounding communities too. We work across Bethany, Cedar Mill, Oak Hills and Lake Oswego for the same gate repair and operator work we do in Beaverton. The soil and fence-age conditions follow the valley, so the same post-first approach applies. Call (855) 473-7281 to schedule.
Serving Beaverton, OR – Our Local Coverage Area
We serve Beaverton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Beaverton
It’s usually the post. On Beaverton’s 15 to 25 year old cedar fences, the hinge post heaves with the clay soil and rots, which sags the panel and strains every hinge. Checking the footing first is what keeps the repair from failing the next wet season. Call (855) 473-7281 for an exact quote; estimates are free.
Often it won’t. Older mid-century lots near downtown often have a gate swinging into a gap too tight for a standard 4-by-8 prefab panel, which is why we regularly build custom gates with a tighter swing radius and offset hinges, or convert to a slide gate. We measure on-site before recommending. Call (855) 473-7281 for a free estimate.
Check the safety devices first. A misaligned photocell or a loop detector picking up interference will make the operator reverse even when the gate is sound. After that, the obstruction sensitivity and travel limits are the usual suspects, but leave operator wiring and power to a trained technician. Call (855) 473-7281 for a free estimate.
We repair far more LiftMaster and FAAC operators than we replace. Control board faults, safety edges and limit switches are all repairable, and brand-agnostic diagnostics mean we fix what failed instead of selling a swap. A new operator only makes sense when the motor or gearbox is truly gone. Call (855) 473-7281 for a free estimate.
Yes, in most cases. We plan the job so vehicle and pedestrian access keeps working, sequencing post and footing work around the way you actually use the gate. When a full day down is unavoidable, we tell you up front. Call (855) 473-7281 for a free estimate.
Get Your Beaverton Gate Moving Again
Whether it’s a heaving hinge post, a slide gate off its track, or an operator that keeps reversing, we’ll diagnose the real failure and give you a written price before we start. Our technicians have up to 13 years of experience and work on the gate you have, whatever brand drives it. Call (855) 473-7281 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is available, and we’re glad to help across Beaverton and the nearby cities.
Written by the team at Gate Repair Portland.