Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Portland?
Gate installation in Portland typically costs $2,200 to $8,500 for a single residential driveway gate with an automatic operator, with most projects landing near $4,000. A basic manual pedestrian or garden gate runs $900 to $2,400, while a wide double swing gate with two operators, keypad entry and safety loops can reach $12,000 or more. The final number depends on gate size, material, operator brand, and how much concrete and wiring work your property needs.
We’re gate specialists, not generalists. Every call we take is about a gate, and that focus is why we can give you real numbers instead of a shrug. Our technicians have up to 13 years of experience with the systems Portland properties actually run. For a wider look at what we handle, see gate repair Portland.
Key Takeaways
- Typical single automatic driveway gate installation in Portland: $2,200-$8,500.
- Manual gates cost far less than automated ones: $900-$2,400 installed.
- Operator brand and model can swing the total by $1,500 or more.
- Concrete, trenching and electrical work are the hidden line items that move estimates.
- We work with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule.
Gate Installation Cost Breakdown (2026)
Here’s how a typical Portland gate installation breaks down into line items. These are estimated ranges for the local market in 2026; the written estimate you receive sets the final price.
| Line Item | Estimated Cost |
|---|---|
| Manual single swing gate (up to 12 ft, wood or vinyl) | $900-$2,400 |
| Manual single swing gate (steel or aluminum, up to 12 ft) | $1,600-$3,800 |
| Double swing driveway gate, manual (12-20 ft span) | $2,400-$5,500 |
| Single swing gate with automatic operator (one arm) | $2,200-$5,800 |
| Double swing gate with two automatic operators | $4,800-$12,000 |
| Sliding gate with operator and track | $4,500-$11,500 |
| Operator unit alone (single-arm swing, common brands) | $650-$1,900 |
| Control board, keypad and loop detectors | $350-$1,200 |
| Concrete footings and post setting | $300-$1,200 |
| Trenching and conduit for power run | $400-$1,600 |
What pushes a Portland estimate toward the top of those ranges? Heavy steel gates need sturdier hinges and stronger operators, so the gate and the operator both cost more. A sloped driveway means fabricating a gate that sits level while the ground runs away from it, which adds machining time. Long power runs from the house to the gate are the most common surprise line item, because the trench has to go through whatever your yard is made of. And a property where the gate must line up with existing fencing or a retaining wall usually involves custom work rather than a stock panel.
What keeps the price down? Standard widths, a flat grade, an operator mounted close to existing power, and choosing a gate material that doesn’t need a custom frame. If you already have posts in good condition, a gate-and-operator swap costs far less than a full new install.
What Affects Gate Installation Pricing in Portland
- Gate material and weight. Wood and vinyl cost less up front but can sag over Portland’s wet winters, which may mean more adjustments. Aluminum and steel hold their shape through the rainy season and cost more. The heavier the gate, the stronger (and pricier) the operator has to be.
- Operator brand and model. A LiftMaster or Linear unit for a single swing gate sits in the $650-$1,400 range, while a heavy-duty FAAC or DoorKing operator for a commercial-style entry can run $1,400-$3,000 or more. Brand choice also affects how easy future repairs will be, since parts availability varies.
- Swing versus slide. Sliding gates need a track or cantilever system plus more hardscape, pushing the install higher. Swing gates are usually simpler on a standard residential lot with a flat driveway apron.
- Electrical and access control. Running power to the gate, adding a keypad, intercom, loop detectors or a phone-app controller adds cost. Access control is where budgets quietly climb, so it’s worth deciding up front whether you want a keypad only or a full entry system.
- Site conditions. Sloped or uneven driveways, roots, rock, and old concrete footings all add labor. Portland lots in older neighborhoods often have mature trees and settled hardscape that need to be worked around.
- Permits and inspections. Many Portland gate projects require a permit, particularly when the gate is near a property line, affects drainage, or involves electrical work. Permit fees and the time to schedule inspection are real costs, so check with the city before you commit to a design.
How to Save on Gate Installation
The biggest savings come from deciding your access-control wishlist before the estimate, not after. Changing scope mid-project is the most reliable way to blow a budget. Here’s what actually helps:
- Choose a standard width and flat-grade installation where possible. Custom fabrication is where the dollars hide.
- Keep the power run short. Mounting the operator near an existing outdoor outlet or panel cuts trenching costs dramatically.
- Pick a common operator brand. Brands like LiftMaster, Linear, Viking and Mighty Mule have broad parts availability, which makes future repairs cheaper and faster.
- Get the estimate in writing before work starts. A written estimate that lists line items protects you from surprises and lets you compare proposals honestly.
- Ask the experienced people first. A free estimate from a gate specialist tells you what your property actually needs, not what a general contractor guesses.
We give free estimates and set the price per job in writing. Call (855) 473-7281. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Repair or Replace?
Before you assume you need a new gate, it’s worth getting a diagnosis. Many Portland gates that seem ready for replacement need a new operator, a control board, or hinge and post work, and that costs far less than a full install. A single-arm operator replacement runs $650-$1,900 installed, while control board and keypad work often lands under $600. If the gate panel itself is sound and the frame isn’t twisted, repair is usually the better call.
On the other hand, if the gate is warped beyond adjustment, the posts are rotted at the base, or the existing operator is a model with no parts support left, a new installation is the more sensible spend. We diagnose what you have rather than pushing a replacement because the brand is unfamiliar. That’s the difference between a specialist and a dealer who only stocks one manufacturer’s parts.
Why Work With a Gate-Only Specialist?
Gate installation and electric gate work sit in a narrow trade. The operator, the control board, the safety sensors and the mechanical gate all have to work together, and a general contractor who also does fencing or handyman work is usually learning your system as they go. We only do gates, which means every tool and diagnostic process we bring is gate-specific. When a technician arrives, the conversation is about your gate, not about a schedule juggling three other trades.
We’re familiar with nine major gate-operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. That breadth matters. A single-brand dealer has an incentive to tell you your existing system is no good. We assess what’s on your property and recommend the right path, whether that’s a repair or a new install.
If you’re curious how we handle service across the metro, the Portland page covers the areas we work and the kinds of calls we get most often.
What Does a New Electric Gate Installation Include?
A complete electric gate installation usually includes the gate itself, posts and footings, the operator and arm or track, the control board, at least one safety device such as a loop detector or photo eye, and whatever access control you choose. The work is done in stages: a site visit and estimate, fabrication or delivery of the gate, setting the posts and footings, mounting the operator, wiring the power and controls, then testing and adjusting until the gate cycles cleanly and reverses on obstruction.
Safety matters here. A gate operator carries line voltage and has moving parts that can crush hands, pets or vehicles if the safety devices aren’t right. If you’re considering a DIY install, understand that wiring the operator and setting the safety reverse are jobs for a licensed electrician and a gate professional. Getting that wrong is a genuine hazard, and it’s also a code concern. We don’t hand out step-by-step install instructions for that reason, but we’ll tell you exactly what your gate needs.
How Long Does Gate Installation Take?
A single swing gate with an operator usually takes a day to install and test once the gate is fabricated. Double gates and sliding gates often run two days, and custom fabrication adds lead time before the install date. If the project needs a permit and inspection, add that schedule to the timeline. When you get your written estimate, ask for the expected install window so you can plan access to your driveway.
FAQs – Gate Installation Cost
How much does it cost to install a driveway gate in Portland?
Most single automatic driveway gate installations in Portland run $2,200 to $8,500, with double gates and more complex access control pushing past $12,000. A manual driveway gate is typically $2,400 to $5,500. Call (855) 473-7281 for a free on-site estimate; the written estimate sets the final price.
Is it cheaper to install a manual gate or an automatic one?
Manual is much cheaper up front. A manual gate installs for $900 to $3,800 depending on material, while adding an operator generally adds $650 to $1,900 for the unit plus installation work. Automatic gates cost more but save you getting out of the car in the rain, which in Portland is a real consideration. Call (855) 473-7281 for a free estimate tailored to your driveway.
Do I need a permit for a gate in Portland?
Often yes. Many Portland gate projects require a permit, particularly when the gate sits near a property line, affects drainage, or involves new electrical work for an operator. The permit process adds time and a fee to the project. Call your city’s building department before finalizing a design, and call (855) 473-7281 for a free estimate on the install itself.
Can you install a gate operator on an existing gate?
Usually yes, if the gate is sound and the posts are solid. Adding an operator to an existing gate generally runs $650 to $1,900 for the unit plus $350 to $1,200 for control and safety devices. If the gate is warped or the posts are rotted, a new gate and operator together makes more sense. Call (855) 473-7281 to find out which path fits your property.
Which gate operator brands do you install?
We work with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. That range means we can match the operator to your gate weight, driveway grade and access-control needs instead of steering you toward one brand. Call (855) 473-7281 for a free estimate and a straight answer on what your gate needs.
What Happens When You Call
We ask a few questions about your gate, driveway and what you want the operator to do, then set up a free on-site estimate. At the visit we look at the posts, grade, power access and any existing controls, and give you a written price per job. No pressure, no upsell. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Call (855) 473-7281 today. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, but if a gate fails on a Saturday you can still call and we’ll book you in for Sunday. We give free estimates, and the price we quote in writing is the price you pay.
Gate installation is a real investment, and it’s one worth doing once and doing right. We’d rather spend an extra twenty minutes getting the operator dialed in than come back next month. If you want a straight answer about what your gate will cost and what it needs, we’re the specialists to call.
Written by the team at Gate Repair Portland.
Pricing reflects the Portland market as of 2026. Gate Repair Portland offers free estimates – call (855) 473-7281.
What Our Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Carlos Delgado"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Brian Schaefer"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Brooke Gallagher