Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Beaverton, OR
Installing a gate in Beaverton means working with what this city actually has: fences and gate posts from the late-1990s and early-2000s subdivision build-out, wet winters that push clay soil around, and side yards that are often narrower than a stock panel. We’re a gate-exclusive company. We install new gates, repair the ones you have, and service the electric operators that move them, whether that’s a Linear unit behind a driveway gate or a DoorKing setup on a shared entry. We work on the gate you have rather than steering you toward a full swap. Call (855) 473-7281 for a free estimate.
Why Beaverton Homes Are Different
Beaverton’s housing stock sets the terms of the work. The late-1990s and early-2000s subdivision boom, especially along the corridor near Aloha and Cooper Mountain, left thousands of homes with cedar or pressure-treated wood gates that are now 15 to 25 years old. On those gates the dominant failure isn’t rust. It’s sagging, rot at the pickets and rails, and hinge posts that have been pushed up and out of plumb by frost.
The climate drives that. Tualatin Valley winters are wet and mild, but they swing above and below freezing repeatedly, and that freeze-thaw cycle swells the clay soils under gate posts. Months of rain soak wood pickets and accelerate rot and hardware corrosion, then summer dry spells shift the soil again and throw gates out of alignment. Older lots near downtown and the 97005 area add their own wrinkle: mid-century side yards are often narrow, running between the house and the property line, so a standard 4×8 prefab swing won’t clear. Those jobs call for custom gates with tighter swing radii and offset hinges. Newer townhomes along the TV Highway and Murray Blvd corridors bring a different mix, usually shared entries, tighter clearances and operator hardware that has to be serviced in place.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Beaverton Services
Most Beaverton homeowners call us about one of two things: a gate that’s stopped working, or an electric system that’s stopped responding.
Gate Repair in Beaverton
Gate repair here is usually structural before it’s mechanical. Wood gates from the 1990s and 2000s are reaching the end of their service life, so we look at the hinge posts, the rails and the picket attachments before we touch anything else. Frost-heaved posts get reset to proper footing depth; rotted rails get replaced; sagging gates get re-hung so they swing clear of the ground through the wet season. Hardware that’s corroded from months of rain gets swapped rather than coaxed. If your gate is dragging, sticking or leaning, that’s the work. See Gate Repair in Beaverton for the full breakdown of what we handle.
Electric Gate Repair in Beaverton
Electric gate repair is a core service here, not something we hand off. Control boards, loop detectors, keypads, safety edges and motor assemblies all get diagnosed on site. Operator brands vary house to house across Beaverton, so we come out prepared for whatever system you actually own instead of assuming one make. When a gate stops responding, the cause is often a single failed component rather than a dead motor, and a technician who knows the board finds it faster than one who only stocks another brand’s parts. Head to Electric Gate Repair in Beaverton for the details.
Gate Installation in Beaverton
Gate installation in Beaverton starts with the lot. Fences built during the 1990s and 2000s boom are now at the age where posts have heaved and panels have sagged, and in older neighborhoods like 97005 the side yard is often too tight for a standard 4×8 prefab swing. We measure the actual opening, check the soil and the existing posts, and build to what fits. Explore gate installation for the full scope of what a new gate involves.
Driveway Gate Installation
Signs you need it
Your driveway gate is a stock panel that’s warped or dragging after years of wet winters, the posts have shifted out of plumb, or you’re ready to move from a manual gate to one an operator can drive.
What it costs in Beaverton
Most Beaverton driveway gate installations land in the range you’ll see in the table below, with the written estimate setting the final figure.
How we do it
We measure the opening and check clearances against the house and property line, set new posts to proper footing depth in the local clay, hang the gate with hinges suited to the weight, and adjust the swing so it clears the ground through Beaverton’s wet season.
Automatic Gate Installation
Signs you need it
You’re putting in a new gate and want it to open without leaving the car, or your old operator has failed and the gate is being rebuilt around a new one.
What it costs in Beaverton
Automatic setups run higher than a manual gate because the operator, wiring and safety devices are part of the job; the table below shows typical ranges.
How we do it
We match the operator to the gate’s weight and swing, run the power and control wiring, mount the safety edges and loop detectors, and test every cycle before we walk you through the controls.
What Gate Installation Costs in Beaverton
These are typical ranges for Beaverton work. Your written estimate sets the final price, and that price is quoted and agreed before any work starts.
| Item | Typical range in Beaverton |
|---|---|
| New gate installation | $2,500 – $8,000 |
| Automatic gate operator installation | $1,800 – $5,500 |
| Electric gate installation (gate and operator) | $4,500 – $12,000 |
Can you install a gate that fits a narrow Beaverton side yard?
Yes. Mid-century lots around 97005 often have side yards too tight for a 4×8 prefab swing, so we build custom gates with tighter swing radii and offset hinges to clear the house wall.
Do you handle the power run and the safety edges on a new gate?
Yes. Power wiring, control wiring, safety edges and loop detectors are all part of an automatic installation. We test every cycle and walk you through the controls before we call the job done.
Brands We Service in Beaverton
Our technicians have up to 13 years of experience and are familiar with the operators Beaverton properties actually run: Linear, Viking, Ghost Controls, DoorKing, and more. We don’t stock parts – we diagnose what’s on your gate and source what it needs. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Beaverton, OR
Every job is priced per job by a written estimate. The ranges below are typical for Beaverton and give you a starting point, not a final bill.
| Service | Typical range in Beaverton |
|---|---|
| Gate repair | $150 – $650 |
| Electric gate repair | $150 – $800 |
| Control board or loop detector replacement | $250 – $900 |
| New gate installation | $2,500 – $8,000 |
| Automatic gate operator installation | $1,800 – $5,500 |
| Electric gate installation (gate and operator) | $4,500 – $12,000 |
What pushes cost up in Beaverton is usually the post work: heaving clay and rot mean new footings or hardware that wasn’t in the original plan. Custom sizing for a narrow side yard adds to an installation. Whatever the job, the price is quoted and agreed before any work starts.
Neighborhoods We Serve in Beaverton
We cover Beaverton broadly, from the older mid-century lots near downtown out through the 1990s and 2000s subdivisions toward Aloha and Cooper Mountain. Response across the city is typically same-day for repairs when you call early. Properties near Bethany and Cedar Mill sit close to our routes, so scheduling stays straightforward.
- Downtown Beaverton and 97005
- Aloha and Cooper Mountain
- Murray Blvd corridor
- TV Highway area
- Five Oaks
Service Area – Cities Near Beaverton
Beaverton sits in the middle of our Portland-area coverage, and we regularly work in the cities around it. If you’re just outside the city limits, we likely cover you too. We serve Bethany, OR, Cedar Mill, OR, Oak Hills, OR, and Lake Oswego, OR, along with the rest of the metro. Call to confirm your address.
Serving Beaverton, OR – Our Local Coverage Area
We serve Beaverton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Beaverton
For repair calls we aim for same-day service when you call early. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 473-7281 for an exact quote – estimates are free.
That depends on the gate’s height, location and whether it’s tied to an electric operator. Check with the city’s building department before work starts, and check with your HOA if you’re in a subdivision. We’ll tell you what we’ve seen on similar Beaverton jobs.
Yes. We cover the surrounding cities, including Bethany, Cedar Mill, Oak Hills and Lake Oswego. If you’re near the Beaverton line or just past it, call and we’ll confirm coverage for your address.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Beaverton Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Carlos Delgado"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Brian Schaefer"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Brooke Gallagher